News

Home » News
  • Metal Horse Panel Fence Supplier: Galvanized Pipe, J-Legs & Weld Specs

    2026-11-19

    Four independent engineering mechanisms govern how long a metal horse panel fence survives in an active equine facility: zinc coating continuity at cut ends and welds, 360-degree weld fatigue resistance under repeated kicking shock, pipe wall elasticity, and pin joint stability. Equine equipment importers, ranch contractors, and stable managers need a verifiable specification covering 1.6 to 1.8 meter (4.5 to 6 foot) heights, 2.1 to 3.0 meter lengths, 32, 42, or 48 millimeter pipes with 1.5 to 2.0 millimeter walls, J-legs, circular leg pin connections, and quick-pin gate latches. Read More
  • Sheep Panel Specifications: 0.9-1.5m Heights, Tight Mesh & Yard Layout

    2026-11-18

    Individual sheep panels are modular building blocks, and their value in the field depends on how height, pipe diameter, mesh aperture, and gate positions combine into a smooth stock flow. Livestock equipment dealers, ranch managers, and yard designers laying out drafting races and forcing pens need exact module specifications before counting panels. Combining 0.9 to 1.5 meter heights, 2.1 to 3.0 meter lengths, 25 and 32 millimeter hot-dip galvanized pipes, 100 by 100 or 200 by 100 millimeter tight mesh, oval or round rails, bow gates, walk-thru gates, loading ramps, and an 1100 by 400 millimeter sheep handler creates a single-operator yard. Read More
  • Horse Panel Specifications: 32-48mm Pipe, Oval Rails, J-Legs & Welds

    2026-11-19

    Lower-leg and hoof injuries in equine corrals almost always result from unmeasured rail spacing, thin tube walls, or sharp joint hardware rather than overall panel collapse. Equine facility builders, ranch supply distributors, and importers specifying a horse panel order need verifiable dimensional standards before fabrication begins. Combining 1.6 to 1.8 meter (4.5 to 6 foot) heights, 2.1 to 3.0 meter lengths, 32, 42, or 48 millimeter round pipes or oval rails with 1.5 to 2.0 millimeter wall thickness, smooth 360-degree welds, anti-sink J-legs, circular leg pin connections, and quick-pin gate latches ensures safe horse containment. Read More
  • Cattle Fence Panels Manufacturer: Bronco, PHD & SHD Oval Rail Specs

    2026-11-19

    A single cattle panel specification rarely serves an entire livestock facility efficiently because rotational pastures, dairy holding yards, and high-pressure feedlots or saleyards impose completely different mechanical loads. Agricultural equipment dealers, feedlot engineers, and ranch managers can optimize yard budgets by zoning their layouts across three engineered load grades: Bronco, Pasture Heavy-Duty (PHD), and Super Heavy-Duty (SHD). Matching 1.8 meter panel heights, 2.07 to 2.9 meter widths, 5 or 6 rails in 30 by 60, 40 by 80, or 42 by 115 millimeter oval, square, or round profiles, and twin drop-pin U-lugs ensures structural reliability. Read More
  • Chain Link Fence Gate Manufacturer: Frame Bracing, Hinges & Mesh Spec

    2026-11-17

    Gate sag on a perimeter entrance is rarely caused by hinge failure alone; it stems from an unbraced leaf frame losing its square, hinges spaced too closely, and diamond mesh tensioned from the wrong jamb. Fencing contractors, industrial facility managers, and wholesale importers can prevent racking by specifying a complete load path from tensioned galvanized or PVC-coated fabric through diagonal frame bracing into an independent heavy-wall gate post. Four simple commissioning checks verify alignment across single swing, double swing, and sliding chain link gates. Read More
  • 3D Fence Gate Supplier: Matching V-Fold Panel Geometry, Posts & Hinges

    2026-11-17

    A perimeter entrance built from a generic gate leaf that only approximates the adjacent 3D welded mesh panels will always look improvised and sag under load. Contractors, project specifiers, and fencing distributors ordering gates and panels together must align three geometric datums: overall panel height from 630 to 2430 millimeters, longitudinal V-fold positions, and mesh aperture. Coordinating leaf widths with the 2000, 2500, and 2900 millimeter panel modules, sizing cantilever hinge posts, and ordering single, double, or sliding gates on one schedule guarantees visual and structural continuity. Read More
  • Total 23 pages  Go to Page
  • Go

Contact Us Now

  Tel:
+86-318-7813366
Mobile: 
+86-153-6985-6999
+86-133-2318-6988
WhatsApp: 
+86-15369856999
No.19, Jingsi road, high-tech-industrial
development zone, anping country hebei province, China

Quick Links

Products

Get A Free Quote

Contact us
Copyright © 2025 Tailong. All Rights Reserved.   Sitemap